3M and Oro Radial Bristle Disks
Radial Bristle Disks have a flexible bristle design that can be used for cleaning, pre-polishing, semi-finishing, blending and texturing. They are excellent for use on gold, silver, copper, pewter and brass applications. Radial Bristle Discs are especially good at removing the oxides from jewellery without having to use messy compounds. They are great for cleaning hard to reach areas and fine detail.
Colour coded to help selection of the proper grit.
Flexible bristles conform to the workpiece and clean without removing the base material.
Uniform concentration of abrasive mineral provides a higher cut rate than wire brushes.
Provides a faster, more uniform finish and lowers operational costs.
Discs can be mounted individually or stacked together.
SAFETY EQUIPMENT INCLUDING EYE WEAR SHOULD BE WORN AND MAXIMUM OPERATING SPEED OF 30,000RPM NOT EXCEEDED
RECOMMENDATIONS FOR JEWELLERY APPLICATIONS
|Heavy Cleaning||36x, 50x, 80x||15,000||to||20,000 RPM|
|Fire-Scale Removal||36x, 30x, 80x, 120x||15,000||to||20,000 RPM|
|Light Oxide Removal||120x, 220x, 400x||10,000||to||15,000 RPM|
|Pre-Polishing||220x, 400x, Pumice||12,000||to||18,000 RPM|
|Semi-Finishing||400x, Pumice||5,000||to||10,000 RPM|
|Blending||220x, 400x, Pumice||8,000||to||15,000 RPM|
|Texturing||50x, 80x,120x, 220x||5,000||to||10,000 RPM|
|Polishing||1 Micron, 6 Micron||15,000||to||20,000 RPM|
3M Radial Bristle Disks come in packs of 6.
Oro Radial Bristle Disk are currently only available as sets.