RH Holder Deluxe with 7 Inserts

RH Holder Deluxe with 7 Inserts

The RH Holder holds the same ends as the MKR-7 Hammer and is struck with a heavy chasing hammer or ballpein hammer. The RH Holder is designed to reach inside a bracelet or small bottle to snarl or stretch the metal from the inside while supported in pitch. This makes it possible to avoid the kinking that happens after a bracelet is chased flat and then curved into a round or oval shape. The curved insert ends form delicate flutes or raised areas from the inside. A knob on the side of the tool makes it easy to grasp while the holder is being guided.

RH-1 Insert 1mm Width

RH-2 Insert 2mm Width

RH-4 Insert 4mm Width

RH-6 Insert 6mm Width

RH-6R Insert 6mm RD

RH-8R Insert 8mm RD

RH-35R Insert 35mm RD

Note: It is recommended to use a parting agent on the metal before it comes in contact with pitch .