Gemmasta 150mm (6 Inch) Trim Saw with Motor & Base Board

Sold Out

Calculate Shipping

GEMMASTA 6" Trim Saw With Motor 

Made in the Australia.

Quality cast alloy solid construction, a 5/8" left hand arbor, a blade guard, and belt guard. Depth of cut is approximately 47mm.

Cast, machined and powdercoated in Australia to the highest standard. These saws have been used by Australian gem cutters for over 50 years. Formerly manufactured in Adelaide and now made in Ballina NSW.

The saw table measures 280mm x 200mm.

The base board measures 290mm x 500mm.

The saw also comes with:

1/3hp motor with on/off switch

Two speed pulley system running at 2425rpm & 3640rpm.

Notched rim diamond saw blade

A Section V Belt

2 Speed Pulleys

Plywood Base epoxy sealed for high water resistance.

Rubber feet.

Click on the photos for an enlargement.



Brand Gemmasta
Shipping Weight 16.0000kg
Shipping Width 0.390m
Shipping Height 0.260m
Shipping Length 0.620m
Shipping Cubic 0.062868000m3
Unit Of Measure ea

Gemmasta Trim Saw

By: on 29 January 2024
This 150 mm Diamond Trim Saw is a top grade piece of Lapidary Machinery for anyone wanting to cut small Slabs and trimming to cut Cabochons

Write a product review

Others Also Bought

More From This Category