Jewellers Complete Bur Kit

Jewellers Complete Bur Kit 

This kit comes with many of the common use burs and polishers for jewellery makers.
Included is three popular sizes in the Ball Bur, Hart bur, Cup Bur, Drills & Tapered Cross-Cut burs. These will allow for drilling holes, creating seats in bezels, notches in claws, rounding off ear posts and grinding out metal in hard to reach places. A split mandrel that can be loaded with emery paper for sanding, multiple mops, brass, hair, muslin, and felts are to be loaded with polishing compounds for industry standard finish. We reccomend tripoli compound followed by red rouge.
Three grades of silicone polishers are great for refining metal surfaces and polishing in between claws and inside of settings. 

All pieces have a 2.35mm shaft. 

Fox Germany; Round Ball Burs 1.00mm, 2.00mm, 3.00mm
Fox Germany; 90 Degree Hart Burs 1.10mm, 2.30mm, 3.00mm
Fox Germany; Tapered Cross-Cut Burs 0.80mm, 1.00mm, 1.50mm
Fox Germany; Cup Burs 0.90mm, 1.20mm, 1.50mm
Fox Germany; Drill Burs 0.60mm, 0.80mm, 1.10mm

Silicone Knife Edge Polisher 1 x Fine(Blue), Medium(Pink), Coarse(Grey)
Silicone Mounted Bullet 1 x Fine(Blue), Medium(Pink), Coarse(Grey) 
Silicone Round End Cylinder 1x Fine(Blue), Medium(Pink), Coarse(Grey)

Felt Bullets 1 x Small, Medium & Large
Felt Cylinders 1 x Small, Medium & Large

Mounted Brass Brush x 1
Mounted Nylon Brush x 1
Horse Hair Brush (Brown) x 1
Goat Hair Brush (Brown or White) x 1
Muslin Mop (Yellow) x 1
Cotton Polishing Mop x 1
Fluffy Wool Mop x 1

Split Mandrel x 1
Stepped Mandrel x 1

Note: Goat hair brush may come in white or brown colouring.
Some silicone burrs may vary slightly in shape depending on stock.