Tin Blade 155mm x 0.35mm x 20mm Arbor

LAPIDARY DIAMOND SAW BLADE

THIN KERF 150-155mm. Select thickness & centre size. 

The depth of the notches is 2mm. These saw blades are steel core. The strength of steel gives you a thin kerf (thickness of cut) so you don't waste a lot of precious material.

The blades will rust if left standing in water for an extended period of time. If you choose to leave your blades in water over night we recommend adding a rust inhibitor to your water.

We can also supply a saw blade bush to fit 1/2" or 5/8" to fit the 20mm arbor holes, as well as  7/8", 3/4", 5/8" or 1/2" bushings for the 25mm arbors. Bushing must be specified when you place your order. If we have to send them later we must charge you for them.

If the blade seems to slow down in cutting, you can take an old corundum grinding wheel 100 or 80 grit, slice into this a few times, and you once again have a clean smooth cutting blade. We also stock aluminium oxide dressing sticks for sharpening these blades and also for cleaning our diamond wheels.