STEPPED Diamond Plated Core Drill 1.60mm

$4.00
In Stock

Diameter


Calculate Shipping


STEPPED DIAMOND PLATED CORE DRILL 2.35mm Shaft

These step from a 2.35mm shaft and taper to a narrow head allowing it to fit in most micromotor handpieces. 

Diamond Core drills are used in a rotary tool such as a Dremel or can be used in a drill press for making small holes through stones. The holes can be used for hanging the stone by a cord, leather or jewellery findings. 

It is always recommended to use a coolant (usually water) when working with these drill bits. This will help increase the life of the product and offer you a better value. It is also recommended that you wear eye protection such as safety glasses.

Do not force the drill bit, let the diamond do the cutting. Frequently take the drill bit out of the hole you are drilling and flush with water to remove the debris.

(DCDS)

SKU DCDS
Brand SLS
Shipping Weight 0.0050kg
Shipping Width 0.004m
Shipping Height 0.050m
Shipping Length 0.004m
Shipping Cubic 0.000800000m3

Be The First To Review This Product!

Help other Gemcuts users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category