Heavy duty 8" cast aluminium arbor with a 3/4" shaft, 3 speed pulley and sealed ball bearings.
The motor and wheels are not included. The motor can be mounted at the rear or under the bench. The arbor will accept four 6 or 8 inch wheels and can be set up as a three speed two or four wheel grinder, wet buffing unit, or a polishing station.
Optional accessories include Splash Shield, Tool Rest and Overhead Water Kit as well as a range of flanges and all standard Lortone cast aluminium and plastic face plates.
The arbor dimensions are 696mm long x 400mm high.
The useable length of the shaft on each side is 200mm.
Footprint of the base mount is approximately 140mm x 140mm.
If you would like build your own cabbing machine this unit provides all you need to start.
Be The First To Review This Product!
Help other Gemcuts users shop smarter by writing reviews for products you have purchased.