GEMMASTA GMP81 No.4 Grinder 6 Inch

6 Inch x 4 Wheel Grinder

$2,995.00
In Stock

Wheel Diameter


Calculate Shipping


GEMMASTA GMP81 No.4 Grinder

Includes Stainless Steel Tray, Baseboard, Motor and Wheels

DUE TO  HIGH DEMAND THERE IS CURRENTLY A 2 - 4 WEEK DELAY ON THESE MACHINES.

OUR WORKSHOP IS RUNNING AT FULL CAPACITY AND WE ARE COMPLETING MACHINES AS FAST AS POSSIBLE. PLEASE BE PATIENT AND GIVE US A CALL FOR FURTHER DETAILS.

A must for the professionally minded cutter, offering all the benefits of processing with diamond on one comprehensive, robust machine. It includes a 1 Inch thick shaft, 2 diamond grinding wheels with 2 diamond sanding wheels and 2 machined face plates. 

The body of the machine is a heavy walled, durable aluminium casting. It has wide cast aluminium guards eliminating rust and sheet metal vibrations.

Water fittings are supplied, with independant tap control to each wheel, where the water is spread across the face of the wheels and then minimized by means of a rubber flap. The machine is mounted in a heavy duty, large capacity, stainless steel tray.

A 1/2hp motor is supplied and combined with a Three Speed Pulley Set runnings at speeds; (850, 1420 and 1988 rpm) to suit a range of uses. 

We recommend that polishing be done separately, see: (GEMMASTA GSP8 Polishing unit)

STANDARD SET UP

2 - Nickel bonded diamond wheels of 180# and 360# 

2 - Resin bonded Nova diamond wheels of 600# and 1200# 

2 - 6" machined aluminium discs  1" bore UNF thread

Please call us if you wish to change the wheel grits.

Originally designed and built by Roy Gaerth in Adelaide in 1972, these heavy duty lapidary grinders have long been the machine of choice for many people in the Australian Opal Industry, and in Gem and Lapidary Clubs right around Australia. Roy eventually sold the manufacturing rights to Gemmasta Lapidary Equipment in Flinders Park, South Australia and it was later aquired by Shell-Lap in Adelaide. In 2018 Shell-Lap closed when the owner retired and the manufacturing moved to Ballina in NSW.

Since then the machine has undergone several design improvements to make it even better than the original.

The Gemmasta GMP8-4 now comes with a full stainless steel tray that replaces the plastic moulded tray that was previously supplied with this model. The bearings have been replaced with fully sealed units.

The 3/4 Inch shaft has been updated to a full 1 inch stainess steel shaft. This provides additional rigidity and greater support, particularly those users that want to run heavy sintered grinding wheels.

The 1 inch shaft also means that lapidary wheels used on this machine do not reqire bushing and are less prone to vibration.

This is a machine that is built to last, made of solid cast aluminium components with a lifetime warranty against manufacturing faults.

(GMP81-4)

SKU GMP81-4
Brand Gemmasta
Shipping Weight 48.0000kg
Shipping Width 1.100m
Shipping Height 0.400m
Shipping Length 0.700m
Shipping Cubic 0.308000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other Gemcuts users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category