Water Manifold for 6 Wheel Arbor

Water Manifold for 6 Wheel Arbor

Gemmasta water manifolds are manufactured from a sold block of Acetal and are designed for gravity feed water systems. Acetal is a hard engineering plastic with high tensile strength and rigidity, excellent machining ability and versatility of application. Acetal has creep resistance and is resistant to hydrolysis, strong alkalis and thermo oxidative degradation.

Made in Australia in Ballina NSW

Each of these manifolds is fully assembled and is supplied with:

1 x Manifold Body

6 x Brass Male Hose Connectors

1 x Brass Click on Standard Hose Connector

2 x Stainless Steel M6 Hex Head Mounting Bolts

These manifolds are designed to be attached to the back of the machine on the right hand side (the left hand side if you are looking at the machine from the front).

When setting up your gravity feed water system allow enough water head pressure to allow water to flow to the taps on the cabbing machine. You will need enough height and water volume to get sufficient flow.