|
CRYSTALITE 150mm (6") TIN LAP
Manufactured by Crystalite in the USA. These laps are used by commercial cutters worlwide and are excellent for faceting. They are designed to exceed the most rigid requirements.
A fine grained rolled tin lap is bonded to a Crystalite Masterlap disk producing an excellent final polishing lap. This lap will not develop orange peel and scoring of the lap is not required. The tin lap can be used with Cerium Oxide, Tin Oxide or diamond.
They are 10mm (7/16") thickand are ground flat and parallel to exacting standards. The centre hole is 12.5mm (1/2").
These are high quality products manufactured completely in the USA.
| 
