Chasing Hammer (1")

 Chasing Hammer  1" (25mm)

 Many jewelry designs will not require a hammer, but some will.  Most designs for making one piece earrings (earring body and ear wire in one wire component), will require the use of a chasing hammer and anvil to harden the rounded portion of the wire component that goes through the ear.  Any chasing hammer with a smooth face will work well.  With chasing hammers, the edge of the hammer can possibly make marks of the surface of the wire you are hammering.  For this reason, the larger the head on the hammer, the better.  We recommend our 25mm (1") chasing hammer