CRYSTALITE 150mm (6") DIAMOND LAP 3000 Grit Manufactured by Crystalite in the USA. These laps are used by commercial cutters worlwide and are excellent for faceting. They are designed to exceed the most rigid requirements. The diamond is bonded with hard electroplated nickel. Please note: this is a finishing lap for removing scratches generated by rough sanding and is not intended for shaping stones. They are 10mm (7/16") thickand are ground flat and parallel to exacting standards. The centre hole is 12.5mm (1/2"). These are high quality products manufactured completely in the USA.
|
Categories
Lapidary Equipment & Supplies »
Faceting »
Diamond Plated Laps »
