|
|
Product Categories |
High quality, carbide grit in a rubber compound for grinding and polishing. Will work on stone, ceramics, metals, fibreglass etc. The points come bonded onto a standard 2.35mm shaft that will fit most rotary tools such as Dremels, Ozito etc. Recommended for jewellers, lapidary, hobbies crafts and modelling. The abrasive points can be used dry or with water for a lubricant.
SAFETY EQUIPMENT SHOULD BE WORN AND MAXIMUM OPERATING SPEEDS NOT EXCEEDED WHEN USING ANY TOOLS SUCH AS THESE! The abrasive points colour coded and come in the following grits: Red: Coarse (C) Green: Medium (M) Blue: Fine (F) Brown: Extra Fine (XF) Grey: Extra Extra Fine (XXF) They can be ordered individually, in packs of 10, or in packs of 50 (see below) Knife Edge Wheel Small Wheel Cylinder Large Wheel Small Bullet Large Bullet Flame Diameter: 14.50mm Thickness: 5.00mm Diameter: 14mm Thickness: 3.50mm Diameter: 8mm Length: 17mm Diameter: 20mm Thickness: 3.70mm Diameter: 6mm Length: 17mm Diameter: 8mm Length: 20mm Diameter: 6mm Length: 14mm
|
